Check Your Hard Drive(s) Using the WMIC Command

By | July 28, 2020
Print Friendly, PDF & Email

 

 

Check Your Hard Drive(s) Using the WMIC Command

There are several ways you can check your hard drives without downloading 3rd-party apps.

The first way is this:

1. Open File Explorer (Windows Key+ E_
2. In “This PC”, right-click on the drive you want to check
3. Choose “Properties” then click the  “Tools” tab.
4. Click the “Check” button under “Error checking.

You can also check your drives using CHKDSK and the Command prompt. See our article here.

And there’s another, lesser-known way, to check your drive(s) and that’s by using the WMIC command. Here’s how:

Open a Command Prompt.

In Windows 10 type CMD in the taskbar search. When “Command Prompt” appears at the top, press Enter.

In the Command Prompt enter the following command exactly as shown (copy & paste works too):

WMIC DISKDRIVE GET MODEL,STATUS

Then press Enter.

Make sure you type the command exactly as it’s shown above or it won’t work.

Cloudeight InfoAve

As you can see above, my hard drive is A-OK. You can also see the make and model of the hard drive. If you have an external drive or drives plugged in, the WMIC command will check those as well. 

If you get error messages with error codes, be sure to look them up online. If your drive or drives are not OK, make sure your data is backed up on a working external hard drive. Then check them using one of the methods shown at the beginning of this article.

3 thoughts on “Check Your Hard Drive(s) Using the WMIC Command

  1. Lauchlin

    Great tip. Easy to use WMIC DISKDRIVE GET MODEL,STATUS
    All drives checked OK
    Thanks

    Reply

Leave a Reply to Lauchlin Cancel reply

Your email address will not be published. Required fields are marked *